132F0028 Danfoss Danfoss Inverter Drive, 5.5 kW, 3 Phase, 400 V ac

Show Vlt 1. Norco Indie VLT 1 2023 Rebec and Kroes Cycle & Sport Optional: Specify the VLT priority for each peer switch Syntax show vlt id role Parameters id - Enter the VLT domain ID, from 1 to 255

6 Dell Force10 VLT Technical Guide Design rules All the following rules apply to the VLT topologies 2 unit per domain (as of FTOS 8.3.10.2) 8 links per port-channel or fewer OS10# show vlt 1 Domain ID : 1 Unit ID : 1 Role : primary Version : 1.0 Local System MAC address : 90:b1:1c:f4:xx:xx VLT MAC address : 00:11:22:33:44:55 IP address : fda5:74c8:xxxx:1::1 Delay-Restore timer : 1000 seconds Peer-Routing : Disabled Peer-Routing-Timeout timer : 0 seconds VLTi Link Status port-channel1000 : up VLT Peer Unit ID System.

2023 Indie VLT 1 Norco

Units should run the same FTOS version The backup should employ a different link than the VLTi, and preferably a diverse path Future topologies - not supported yet He mentioned something about expired x509 cert, could you check by running #show vlt 1 vlt-port-detail to see if it sheds any light to the issue. OS10# show vlt 1 Domain ID : 1 Unit ID : 1 Role : primary Version : 1.0 Local System MAC address : 90:b1:1c:f4:xx:xx VLT MAC address : 00:11:22:33:44:55 IP address : fda5:74c8:xxxx:1::1 Delay-Restore timer : 1000 seconds Peer-Routing : Disabled Peer-Routing-Timeout timer : 0 seconds VLTi Link Status port-channel1000 : up VLT Peer Unit ID System.

Indie VLT Norco. primary-priority 1; Configure VLT on second switch using interfaces 25 and 26 using: vlt-domain 1 backup destination 1.1.1.1 discovery-interface ethernet1/1/25-1/1/26 peer-routing primary-priority 2; After this the VLT status should be up which can be validated with show vlt 1 Example output Domain ID : 1 OS10# show vlt 1 Domain ID : 1 Unit ID : 1 Role : primary Version : 1.0 Local System MAC address : 90:b1:1c:f4:xx:xx VLT MAC address : 00:11:22:33:44:55 IP address : fda5:74c8:xxxx:1::1 Delay-Restore timer : 1000 seconds Peer-Routing : Disabled Peer-Routing-Timeout timer : 0 seconds VLTi Link Status port-channel1000 : up VLT Peer Unit ID System.

VLT validation commands Dell EMC SmartFabric OS10 Switch. Z9664-1# show vlt 1 Domain ID : 1 Unit ID : 1 Role : secondary Version : 3.1 Local System MAC address : e8:b5:d0:24:0b:46 Role priority : 32768 VLT MAC address : e8:b5:d0:02:21:00. Optional: Specify the VLT priority for each peer switch